Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
i will check , now i have issue , when the wlc 9800 down like 5mintues happens the ap 9120ax chnages to be as ewc , i have to shut and no shut to let them back to wlc
Is there anybody tried this Version of firmware? I want to upgrade critical switch WS-C3850-12XS from 16.3.6 to 16.12.11 and I would be thankful for the notes Regards
hello againfirst , if you have dhcp snooping on yout below layer like access switches m, there is no need to enable it inside the upstreams like and i dont think the dhcp snooping will solve your issue cuzIf you turn off DHCP Snooping, SISF remains a...
Hey Matteo ,i think To fix this on a core/distribution switch, you must explicitly configure a policy that tells SISF to completely stop gleaning ARP, DHCP, and ND protocols on the downstream trunks.Create a custom device-tracking policy that disable...
try ping the RADIUS OR NPS IP from the Controller or AP and check , if its fail so its conncetivity issue , also if its stuck with u ,i suggest using mac filtering feature , will help u
i feel its Before the AP, i mean port config or IP , try to change the access Port thats on MGMT vlan to local vlan thats have IP dhcp server , and check if the AP assigned an Ip from dhcp binding, for ping try to ping the GW first if its pingable t...
