Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello,our company works for dsl-carriers in Germany. One part of our work is the test and refurbishment of cpe-routers like 876, 878 or 18xx. During the test of several 878 we determined problems with isdn test-call.Configuration :!interface BRI0 no ...
Hello,I have to configure about 5k tunnel and additional 5k loopback interfaces on 7301 and 7206VXR (NPE-G1). We are running 12.2 SB and 12.4 Mainline.Are there any limitations regarding a max. number of tunnel and/or loopback interfaces in above ver...
Hi,we have an issue, determining serial numbers of 7301s. How can I determine the chassis serial number of a 7301 ? Due to having internally running an NPE-G1, I disbeleive that it is identical to the processor board ID listed under the "show version...
Hi,I have a general question regarding the datarates in dsl-technology. For example when talking about SDSL, I always hear, the maximum bandwidth on a 1-pair link is about 2 Mbit/s. OK, but does it mean 2 Mbit/s in up- and downstream-direction at the...
Hi,our customer wants to set up the following configuration :switch----------switch | |CSS1----FE-C/O----CSS2 | |switch----------switchAll interfaces, except the FE-Crossoverlink for redundancy-protocol, are in the sam...
Ok, also the enterprise-image doesn't work :Router#sh ver Cisco IOS Software, C870 Software (C870-ADVENTERPRISEK9-M), Version 12.4(11)T3, RELEASE SOFTWARE (fc4)Technical Support: http://www.cisco.com/techsupportCopyright (c) 1986-2007 by Cisco...
I will try this. But in the downloadcenter, you have to coose 876 for the download of this featureset. When you choose 878, this image won't be available.Reg.,Stephan
Hi,thank you for this information. It's very astonishing, but it seems to be a fact, that this ISDN interface on a 878 is not usable for backup purposes.Best regards,Stephan
