Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi allI have an issue where when some users are roaming from 1 side of the building to the next they drop off the network and have to forget and reauthenticate. I didn't set this controller up but I can see Fast transition is adaptive enabled. So I s...
We have a Cisco 9800 L WLC running a guest dhcp server for our leisure centres and they are adding a Kiosk for the spin class. The Kiosk require a static IP address and the class spin bikes need to be on wireless and on the same range as the kiosk so...
HiWe have a Cisco ISE server which was installed by a 3rd party. The certificate has expired so I was trying to renew it. Problem is I generate the CSR get it signed by GoDaddy, download the certificates then try to install. When I try to install the...
Hi marceThis is so good gave me lots to look into. Found this going to make the changes and see how it goes. I will let you know.For best results, it is better to enable dual band support for 11k. This should only be avoided, if single band devices a...
Looking further into the way this is configured they have only ticked Neighbor list. Should Prediction Optimization and Dual band neighbor list not be ticked?
Hi RoadRunnerYes both are on the same site and policy tag. I checked on the AP's and they are all set to AP Mode - Local. Most of the documents it states this should be on FlexConnect but when I click the down arrow FlexConnect isn't an option.
