Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I have XDR where I have integrated my following services:Secure EndpointUmbrellaMeraki DashboardSecure Email Threat DefenseCisco Identity IntelligenceSecure Cloud AnalyticsI am having an issue with some clients were services that are installed are ei...
We use the full Cisco Secure Endpoint client that has the AnyConnect client as part of the suite. Over the past couple of days clients have been getting auto updates that also moved the AnyConnect module up to 5.1.17. When the users try to connect t...
We have 6 sites that each have a DC. The DC also operates as the Windows NPS (Network Policy Server) performing the RADIUS authentication. We have an SSID setup called "Secured" configured as follows:Security - Enterprise with my RADIUS serverWiFi ...
I have a couple of buildings that are to far apart for ethernet and can't dig a conduit for fiber so I am using a Wireless Bridge - The Ubiquity UBB. Every switch, AP, and my MX is Meraki.The issue I am having is all my clients on the other side of t...
We have a location where the fiber connections are showing higher than recommended DB losses. I did not get the measurements back yet so I don't have the exact numbers. We are not fiber experts so we had someone come in to clean up the fiber ends, ...
Thanks Ken,I guess I will have to wait 90 days for these to fall off. However, I do not see the option to set Identity Persistance under my policies in Secure Endpoint. I have looked under all the ptions under Advanced Settings
Thanks Aleabrahao, but the certificates on all the clients appear to be valid and have 2048 encryption. When I roll back clients to 5.1.16, the issue goes away. I think Victoria post today is going to be helpful. I will see if I can do some more r...
This is more for the device cert issue. Normally I would be able to get around that or test it by unchecking the option to Block Untrusted Servers.I thought it might be 5.1.17 not selecting the right cert, but even unchecking the option to autoselec...
After doing some more research on the issue I would like to see if the steps I have put together will resolve the issue. It appears as though the problem is my clients are getting a Schema 1 version of a certificate (Windows 2003/XP compatible) inst...
Thank Brash,One thing I forgot to include in my original post was that only 1 site's DC was still working. It got the same updates over the weekend, but this one is still working wich is unexpected given all the info you and others have provided. I...
