Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
on my SX550x-12F, I am trying to add to my IPv4-Based ACE. the ACE Name is "VLAN_60". I want to do is add a new ACE Policy. but when I try to add I get this error:Cannot delete/modify ACE While the ACL is bound to an interface or Class-map.When I ...
We have 2 SG350x-48 switches in a stack. and we need to add another switch. but I know that SG350x-48 is no longer sold. what are my options? these were replaced by the "Cisco Business 350 Series Managed Switches". can one of these switches be a...
Recently, when I log into my switches (SG350X-48), the webpage is super slow to load. it shows "processing data 60%". then sometimes it stops. sometimes it doesn't finish. sometimes it does load but the graphics (links to pictures) are missing. I...
The tech who implemented our network quit. I'm trying to modify the switch.We have some Cisco SX550X-12F switches. The tech setup vlans on the coreswitch. the Core switch is using ACE and ACL to allow or prevents vlans from talking to each other.I'm ...
We discovered where the binding is. in this "ACL Binding (VLan)" submenu it shows the Vlan ID and the IPv4 ACL. This binds the Vlan ID to the name of the ACL. we have to delete the appropriate entry. then go into the "IPv4-Based ACE" and we are al...
per the link, I go to Quality of Service > QoS Advanced Mode > Policy Class Maps. this is what appears.It also says to go to "Policy Table" and I get the same response.any other thoughts? otherwise, I dont think this is the solution.
Thank you for your response. (This is going to be a bad question) How do I reboot the switch? The original engineer left and i took over; I'm trying to learn how to run these switches. thanks.
Hi Paul. thanks for writing back. I'm a little hesitant to post the running configuration since that's the backbone of our system. I did search through the file: here is where the ACL is set up:---ip access-list extended VLAN_SIXTYpermit udp any ne...