Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I have a ISE server that is unable to communicate with my switch stack. I have tied in my ISE server on the switch already below is my config. aaa authentication login VTY group ise-servers localaaa authentication enable default group ise-servers ena...
I am trying to add a switch to add another switch to my network devices on ISE. I have the switches in a x.x.254.0/24 subnet. ISE will not let me add a device in the same subnet.
I have a 2960X switch tied to ISE that is not reporting logs on the Tacacs accounting reports. I have removed an readded device on ISE and redone the config on the switch for it. I need this for production. ISE version is 3.2.
Hey Guys, I have a test switch I am working with and connected to my ISE server.It seems to be using PAP for authentication but I want to change that to CHAP or MS-CHAPv1.I have already done that on the ISE side now I have to do that on the switch b...
line vty 0 4exec-timeout 30 0password 7 070C285F4D0659logging synchronouslogin authentication ise-serverstransport input ssh this is the config I have right now
