Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello,
We have a request for a client PC to auto connect to one SSID always and prioritze it to auto connect to that SSID always before user logon, is there an xml profile editor to fulfill this request
Thanks in advance
Hi,
We have a Cisco ISE implementation with a single domain (Active Directory), we are trying to add an other domain (New Active Directory with a new Domain name separate from the old one) to our implementation, is it possible to do it, if YES how to...
Hi Community,
We have Cisco ISE Dot1x authentication with Active Directory in a full windows users using their native supplicant, my question here is there a solution to make users able to change their password after it expires, i know that we can us...
We have an SDA environment with an embedded Cisco WLC we are trying to configure dynamic vlan assignement using the ISE for wireless users : 1 SSID with Dot1x access and the VLAN assignement using the ISE. Is it possible to do that.
@DNAC @EmbeddedWL...
Hi,
Yes the ip name-server 1.1.1.1 can resolve the 2.2.2.2 domain but still i cant join the second domain from Cisco it hit me with :
Result for ISE node: ise.ccie.lab.Status: Join Operation Failed: Failed to find domain controller, please check netw...
Hi @Flavio Miranda and thanks for you reply, i saw that but my problem is how to be able to configure the AD as a DNS on ISE to be able to see and reach the new domain when i add an other join point.
Example :
My ISE configuration is :
#domain-name e...
Thanks for your reply,
I'm trying to use both : let the machine authentication happen by default before user authentication (with limited access just to verify machine credenticals with the AD using ACL), then authenticate the user as usal and grant ...
Thanks for your reply,
I solved that,
the issue was with the Authz profile on the ISE i was using the VLAN tag with its number rather than its Name after a debug on the WLC i realised that the L2 VNID on the WLC accept only the VLAN name.
Thanks a lo...
Hi PabMar,
Our Customer want to have a single SSID for all different employees (Finance, RH, admins) and a single Guest SSID, on the wired it is simple to have that with the Dot1x unlike the wireless.
