Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Odd question. Is it possible to search for a products VID number from the serial number of the device? We have switches deployed that we need to identify the VID number but cannot physically look at the labels as they are racked and in production. Is...
I recently received an RMA 9130axi-b running a very old image. The WLC is running 17.9.2 and the AP fails to download the new image due to a smaller flash partition. Best option here for me would be to follow an upgrade path first. I’m having a tough...
Hello All,
Dealing with an extremely frustrating issue when trying to get a WLC 3504 set up. I have three vlans for my network VLAN 10, VLAN 2, and VLAN 3. VLAN10 is the network that hosts will connect to and VLAN 3 is my management vlan. Finally VLA...
Thanks Leo. Another problem is that we have switches in inventory that are not in production. Before retrieving them we need to verify the VID as well. Unfortunately we don't always have the ability to physically look at the labels before they get ch...
I did work with TAC and they were able to point me to the right software hop download. However sometimes responses on a level 3 take a day or longer and time was starting to come at a premium so I decided to reach out to the community.
It’s completely possible it was the wrong command. I used the following to try to set the ip to static. While powering the AP with a poe brick: capwap ap ip address <ip> <mask>. Searching through the available commands with “?” This was the only one ...
Rich,
your post regarding the flash partition issue was the original road that led me here. What my issue was which I resolved this morning was that the AP did not take a static ip assignment and therefore wouldn’t talk to my tftp server. I worked ar...
