Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I have (2) 6509's with FWSM's in slot 9. I need to upgrade the code tonight since the FTP process does not function since there is a bug in the current code. Whe is the procedure to upgrade the code from 2.3.4 to 2.3.4.8 , what is the potential outag...
I have a vendor that is on a 192.168.100.0 network and we are on a 10.0.0.0 network. I have deployed a router on their site so they can pass traffic to us and traffic back to them. We don't have a 172.18.xxx.xxx network that they have behind the 192....
I am trying to configure or find out why ftp passive outbound is not working, what can I check to verify my configuration? I am tryning to provide a subnet ftp access and passive ftp on a fwsm.thanks,
I have Cisco Aironet MP1350 wireless card in a ton of IBM machines that require WPA and TKIP support. When I go to the Microsoft OS wireless client not a supplicant I do not get those options. Cisco states that they support this so what am I either d...
I need to create a translation pattern to call and offsite number for after hours call center and was unsure if a callhandler in unity is involved. I know how to create the translation pattern but was unsure why it activates right away sending the ca...
Varakantam,When I copy the file from tftp I perfornm the follwoing correct, because all I see on the FWSM flash is cdisk.copy tftp://10.0.xxx.xxx/c6svc-fwm-k9.2-3-4-8.bin flash:Also how do I check the state?Gerry
Sundar,I do have a 2811 at the vendor site, I can see all of my routes and networks. The issue is that from the vendors 192.168.100.2 ethernet interface on my router his LAN I can not ping certain networks. Behind his 192.168 network which is his fir...
