Just implemented a new 7204VXR router with VPN module installed and IPSEC configured and noticed this message in the logs - crypto_engine_ps_vec(): no subblock attached.Any clues as to what could be causing this would be appreciated.ThanksMark

Is it possible to prevent recursive routing to a destination network:-Example below:-lab-yoc-g-2600-h#sh ip route rip R* 0.0.0.0/0 [120/1] via 10.128.18.149, 00:00:01, Tunnel2 [120/1] via 10.128.18.145, 00:00:02, Tunnel1lab-yoc-g-2600...

We have a pair of Cat6509's on one floor of the LAN that have HPt5710 terminals connected to 5 x WS-X6148-GE-TX modules. Other floors with the same terminals and switches don't have this problem. The problem is that when our TS team rollout an image...

Does the command "no fixup protocol smtp" have to be performed in a Maintenance window so as not to impact current connections when performed on the FWSM v2.3(4)

I have taken on managing a CSA MC with version 4.0.3.739 + 4.5.0.565 agentsI cannot upgrade the 4.0.3.739 agents to 4.5 because of the mandatory Windows System Module preventing any action to the Agent Service Control. If I remove the mandatory WSM t...