Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi,Does anybody knows an OID to get (just in one snmpget) the total amountof channels currently in use by an ISDN interface?I've found the "isdnBearerOperStatus" entry which works fine, but sinceit is a per channel entry, it should be performed on ev...
Hi,I'm in the middle of a CNR 6.2 over Solaris implementation, and I have a doubt regarding the SNMP Server.I saw the default port is 4444, and it can be changed. But what I realy would like is to use only the SNMP Server of the OS (Solaris), and to ...
hi,Did anybody use the "application" on an ephone-dn config mode?We are looking for a basic ivr/AA triggered not by a pots dial-peer, but by a call to a specific direct number within the CME. We thought the command was ment for this, but couldn´t mak...
Hi,In regards to the previous answer (1), yes you can have only 8 timeslots assigned to that interface and have the other 24 for other interface. You just have to configure:controller AU-4-TUG-3 1/0/0.1/1 mode c-12 tug-1 1 e1 1 channel-group 0 timesl...
Michael,Your reply was really helpfull, The issue is what I was suspecting it would be.. The thing is, do you know if is there a TCL that runs fine on a ephone-dn application? (public or cco partner accessible)Thank you in advance.
ebreniz,Thank you for your reply, but my question still remains.. have anybody ever tried it?. I came across with this document before and I applied the configuration, but the TCL didn't work (It had been loaded though..) If you have tried it and wor...