Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I'm evaluating ASA5500-X with FirePower bundle with Eval licenses.
I'm facing 2 issues with FSMC,
1, FSMC show 2 critical health errors for SFR & Sourcefire3D related to time synchronisation. - Module Time Sync is out.
2, Nothing is displayed in "Con...
I'm having a strange issue with ASA 9.3.1 on 5515-X.A vpn device is connected inside LAN and is natted to 2 different public IPs. The problem is that when the primary isp fails and comes back, the remote side is unable to connect to the vpn device th...
What is the best & least expensive way to build 60GB backbone network within 2 buildings which are less than 400 metres apart.Building A has the following, about 10 Servers with 1000T connectivity,5 nos of 48Port Gigabit stackable switch with 4 X 1G ...
I'm trying to find a solution for the following setup, Blue ISP is the primary.Both are MPLS connection only.the requirement is,if Blue ISP @ site A/B/C or HQ fails, it should automatically switch to Red ISP 2 in site A AND HQ until Blue IPS connecti...
In my experience, ASA9.3.x seems to be a CPU hogger and is not stable. I've tested ASA9.3.x with average 70~80Mbps internet traffic on 5515-X, it would work fine for a day or two and start dropping all traffic.Downgraded to ASA9.2.2 and never experie...
Hi,VPN initiates site-to-site tunnel to the other end. Both ends private IP is mapped to the VPN box and only server traffic goes thru the tunnel. NAT on ASA to the real ip works well when testing in lab setup, even with physically un/plugging the ca...
@TomThanks, very nice explanation. When using CWDM for say 40G or 100G, you need to have output from 40/100G cards connected to network port of CWDM. Am i correct ?.@RaymondWe don't have 4900M yet, only looking for that option. Regarding the slot 2 a...
Many thanks,@vmillerwe have 2pairs left, planning to have 12core OM4 so it can support full 10G.I guess CWDM is for those with limited fibers over long distances. And is 2.4Gb max speed per fiber or per wavelength ?. And compared to the cost of a say...
