Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Is it possible for a vpn client that terminates on an ASA to participate in a eigrp network? The eigrp network is a dmvpn setup between the host and spokes.
I have a dmvpn with about 20 spokes connecting to the hub. I am running eigrp. Is is possible to have spokes connect to each other without going through the hub? I have about three spokes that would need to communicate with each other. If so is the ...
Does anyone have any information on connecting a Cisco 3825 ISR with CME to a NEC 2000 IPS phone switch? We want to migrate slowly over but will still need to maintain the NEC.
I currently have approx. 20 remote branches on cisco 2811 routers connected as spokes to a Cisco ASA 5510 at the head-end. These are simply stright ipsec connections with a shared-secret. All the routers are running 12.4(15)T IOS. I have a probelm...
I am exploring the idea of DMVPN. Currently I have about 15 sites on Cisco 2811 ISR routers connected to an ASA at the HQ on an IPSEC vpn. This number is expect grow to over 30. I'd like to incorporate a fully meshed vpn terminated back to a Cisco ...
Your help has been unbelievable. Many thanks!! Anyway, we would need to go PRI/QSIG on the NEC. Any idea of type and cost of card for the NEC? How can we tell exactly what revision our NEC is running? Are there any limitations to having this setup...
I know at this point that the PRI would remain at the NEC. We have about 80 phones on the NEC and will only have 12 phones on the Cisco With that being said, we will have an NEC tech to assist us with the 2000. As it sounds like you've been down this...
Here is the brief overview. We currently have a NEC NEAX 2000IVS that has been upgraded to a NEC 2000IPS. However, it is end of life. We want to maintain the NEC as our PBX but at the same time install CME on our 3825 that will provide ip phones t...
