navneet_78
Level 1
Level 1
Member since ‎10-15-2005
‎08-18-2017

User Statistics

  • 151 Posts
  • 0 Solutions
  • 63 Helpful votes Given
  • 0 Helpful votes Received
Recent Badges
70 Discussion Posts
60 Replies
40 Discussion Posts
40 Replies
5 Discussion Posts
50 Discussion Posts
30 Replies
30 Discussion Posts
70 Replies
60 Discussion Posts

User Activity

Hi All, Can you please let me know if I can configure BGP on a Cisco 3550 switch (WS-C3550-48). It is currently running Version 12.2(44)SE1.If not, what would be the recommended version in that device?Appreciate your response.CheersNavneet
<p>Hi ,</p><p>I have a site with around 100 users. There are total 3 Vlans for each of the floors. Users on one floor are not able to access the  PCs of other users (on different floors) using the hostnames. But they can do this with IP address.</p><...
Hi All, I have configured a tunnel between 2 sites. I had originally configured Diffie Hellman Group 1 on the ISAKMP policy on remote and Hub end.I have changed the DH group to 2 now. I can see that the Tunnels and Eigrp are up still, and traffic is ...
Hi, I had IP multicast rate-limit configured on my E1 link in a 7206 router. The Card used was PA-MC-8TE1+.I have moved the link over to a Cisco 6506 device, and terminated the link on a SPA-8XCHT1/E1 module on the SIP 200 controller. The IOS version...
Hi ,Can anyone please let me know how to check loops between points A and Z? When I need to check the local loop at point A or Z, where should i ask the service provider to give the loop from? Iam pretty confused the way this troubleshooting with loo...
Community Statistics
Member Since ‎10-15-2005 09:49 PM
Date Last Visited ‎08-18-2017 03:54 AM
Posts 151