About Gabe-0000

Gabe-0000 · 01-08-2023

Hello, I am studing Cisco's technology, and I want to make a LAB environment in my home, so I used 3 older 1700 series autonomous AP, and I tried to change the authentication method to username and password by using local RADIUS built-in. But no matt...

Gabe-0000 · 07-31-2026

I had the same issue on 1x C3850 and 2x 9200L series switches. Also, it's not just happening on the POE device port; if the device is not even POE, it also has an issue with a flapping PoE. I just disabled the POE on that port using the command: powe...

Gabe-0000 · 01-08-2023

Thanks for the video, but I tried the video method it didn't work for my local RADIUS either. Local RADIUS server statistics have no failures or successes attempt see: https://ibb.co/fGPQJcjHere is my config: Note: My VLAN 10 can talk to all VLAN, VL...

Gabe-0000 · 01-03-2023

I tried configuring these on the Aironet 1700 access point not working, The client cannot connect with the username and password. Just wondering have you test-configured the access point in 1700 before?

Gabe-0000 · 12-29-2022

For 2960s stack switches, you can use this guide, it works for 2960s too, I tested it today by using the 152-2.E9 image. Go to: Switch Stack IOS Upgrade - Manual (.bin Image)After the upgrade, you can also delete the old IOS image by using delete fl...

Member Since	‎12-29-2022 09:29 AM
Date Last Visited	‎07-31-2026 09:39 AM
Posts	5
Total Helpful Votes Received	1

User Statistics

User Activity

About Aironet 1700 AP configure wireless security by using localRADIUS

Re: 9300X PoE ports fail to establish Ethernet link after upgrade 17.1

Re: About Aironet 1700 AP configure wireless security by using localRA

Re: Configuring Autonomous AP for Local RADIUS Authentication

Re: upgrade 2960s stack with bin files only