Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I have a certificate installed and working on my WLC9800 for webauth. The same certificate does not seem to be working for Webadmin.For Webadmin I went into administration > management > HTTP/HTTPS/Netconf/VTY and changed the trustpoint to the one I...
Looking for some current Documentation on how to allow password change over VPN after the password has expired. Everything I find is old. We are on anyconnect 4.10 with Gina
I have Guest WIFI configured on the WLC9800 L and would like to generate an internal certificate to get rid of the certificate error I get when I connect to our guest wifi. When I click add certificate I am not sure if I should put in 192.0.2.1 for t...
I have a WLC 9800 L controller with 2 WLAN's. One with AAA Radius and Mac authentication. It is working without issue. The 2nd one is a Guest WLAN. It works without issue if I choose Consent as the authentication. But fails if I try to use Web Au...
I did this and it shows the correct trustpoint certificate but I still get Your connection is not private when I access the controller9800#show ip http server status | include trustpointHTTP secure server trustpoint: .pfx <-- trustpoint configured fo...
Thank you I upgraded my controller to 17.6.5.22 and the certificate is now imported correctly but I'm confused about the last line I'm not sure how to create a DNS record without an IP. Anytime I have created a record it has corresponded to an IP. W...
I thought the configuration in the controller with the trustpoint and the global web auth would tie that together. So what needs to change to get this to work?
