Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I am redoing our network design for existing offices on our new MPLS circuit. Will the remote offices workstations, servers, and phones be able to communicate with this topology? I was thinking that the local PC's, etc would think that since a requ...
I have a new Cisco 871 with this config:ip subnet-zeroip cef!!no ip domain lookupip domain name yourdomain.comip multicast-routingno ip igmp snooping!!!interface FastEthernet0!interface FastEthernet1!interface FastEthernet2!interface FastEthernet3!in...
I have a remote office connected via a new MPLS Circuit and the carrier gives us an bridged ethernet handoff.We purchased an 871 Router that has 4 switchports and one WAN port. I want to use f0 port to connect to our 3COM POE phone/workstation switc...
For some reason I cannot make connections to IMAP4, IMAP, or IMAPSSL from outside the Firewall. SMTP, HTTP, etc. portmappings/ACLs are working fine. I have the appropriate portmappings in place and have the acl allowed. The internal IMAP server is...
On my 1841 Router. I appreciate any help! Normal SMTP from the outside coming into our NAT'ed router to the SMTP server 10.1.3.134 does not work. If we do nslookups on our internal DNS servers they fail. Our internal DNS servers are not able to cont...
Thanks guys for both of your recommendations. I know that this is a bridged scenario because we already had a smaller site without a router that was already running. We have sat on multiple conference calls with our carrier and verified.We have bee...
I guess? The carrier just gives us an ethernet drop off of their Zhone (equipment name) box that essentially combines our existing TI's into 1 ethernet drop. Then that box taps into a few others and into their fibre loop. We do not manage any of t...
Sorry, should have clarified that. We do not manage the MPLS equipment and our carrier just gives us an ethernet handoff that is essentially a bridged connection from our main office.This is the reason we need to put Routers in place, to limit the s...
Here is the show ip nat trans:Pro Inside global Inside local Outside local Outside globaltcp 69.x.x.242:80 10.1.3.2:80 64.90.2.238:4422 64.90.2.238:4422tcp 69.x.x.242:80 10.1.3.2:80 68.213.162.98:10789 68.213.162.9...
