I have need to set up some QoS for a particular interface. Our network isnt configured for QoS as yet, so this will be a one-off limited implementation.The router is a 3825 running 12.4. Behind the router are a number of networks in the 10.2 range. T...

I have an FWSM in a 6509 configured to route 3 subnets. 'inside' is 192.168.1.1 connecting to 192.168.1.0/24. 'accounts' is 192.168.2.1 and 'outside' is 192.168.3.1. All are using 50 as security level. I have 'same-security-level' configured on the f...

I have configured a vlan on a 6509 so that it links the MSFC with a FWSM blade. The vlan is supposed to show as hardware type EtherSVI. Instead it shows a RP Virtual Ethernet. Can someone tell me how to make it EtherSVI?

I have an MSFC and FWSM in a 6509. Following the Cisco doco, i created vlan 55 in the sup and assigned it to the firewall via the firewall-vlan command. To complete the SVI i assigned vlan 55 to the MSFC (int vlan 55) and issued it an address. Cisco ...