About birch-bay

birch-bay · 01-26-2023

I decided to upgrade my SG 200 to a CBS350. When I replaced the SG 200 with the CBS350, everything worked great with the exception on not being able to establish communication with the HT2000W satellite router / modem. When I ping from the new switch...

birch-bay · 01-27-2023

I will try that.I may have found another possibility. While searching the STP Interface Settings I found the Port Role was set to Root, the Designated Cost was set to 0 and the Forward Transition was set to 2. A bit of follow up took me to the MSTP...

birch-bay · 01-27-2023

I have disabled the Smartport feature in Smartport --> Interface Settings and changed the Switchport mode in VLAN Management --> Interface Settings from L2 to L3. When I ping 192.168.20.10 (the VLAN IP) with the Source IP set to Auto and with the So...

Member Since	‎01-26-2023 01:32 PM
Date Last Visited	‎02-03-2023 02:07 AM
Posts	3

User Statistics

User Activity

Hughes HT2000W fails to communicate with CBS350

Re: Hughes HT2000W fails to communicate with CBS350

Re: Hughes HT2000W fails to communicate with CBS350