Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Just starting to test this out and configure everything. ACS is setup with the controllers and my test user. Using LEAP (802.1x). From the controller I can ping my ACS box and ping my access point. From the vlan that the access point is configure...
We have traveling people that come in with a 3com router with an IP address on vlan x. From any other computer any other ping sourced from any vlan other than x, it goes with no problem but sourced from vlan x it won't work. Any ideas?
I noticed today I had the following error message appearing in one of our 6500's. We're rebuilding with Sup720's anyway, but I would still like to know what my error messages mean. After unsuccesfully finding any information online I have come here...
I've been working with 6500s running CatOS and seen the debug messages telling you when a port has gone from blocking all the way down to forwarding state. I like those messages, but now with the 720 sups I can't seem to find a command that will dis...
So I setup up WPA and now everything is working, which is great, but we have handheld devices that can't do WPA. So can anyone give me some guidance as to how to get it working with WEP?
I'm also having the same problem, trying with an Atheros client and 128 encryption though, same everything else. I'm going to try WPA today and see where that gets me. Did anyone figure this out yet? As with the previous suggestions, the managemen...
Also, when I take off the security. I connect and can ping everywhere with no problems. One more thing that has me a bit confused is that with the controller set to broadcast the SSID in the WLAN it won't broadcast.... atleast not that I'm seeing. ...
