Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi,I'm in the process of purchasing a WS-C2960G-48TC-L switch along with a smartnet contract 8x5x4 from a registered cisco reseller.The reseller says we need a CON-SNTE-PKG11-VS which I find quite expensive (50% of the switch price for a 3 years cont...
Hi,I've just setup a (static) site-to-site IPsec vpn between to ios routers. It works fine for traffic sent to those routers.Traffic generated by the routers (ie ping or dns requests) goes into the tunnel with the IP address of the outside interface:...
Hi,I'm running an IPsec site-to-site VPN between to cisco router (a 1721 and a 857).It works fine with the following access-list in my crypto map:access-list 104 permit ip 172.16.1.0 0.0.0.255 172.16.10.0 0.0.0.255But I want to only allow some traffi...
Hi, I have a cisco 1721 (and a 877 also) running 12.4 connected to an ADSL line with a WIC-ADSL. As per documentation recommendation I have:interface FastEthernet0ip tcp adjust-mss 1452...interface Dialer0ip mtu 1492...The router has a firewall IOS i...
Hi,I have a cisco 1721 router along with an ADSL WIC (and ADSL line), which work fine.When one of the LAN user sends through ftp a large file to an external server, it renders every over external access sluggish (ssh, telnet, dns and even web browsin...
Thanks Jorge for your answer.I'm do know what kind of coverage I need, I'm just puzzled about the smartnet level (ie the PKG11 part of product code). Based on the sole price of the smartnet package, I was wondering if the rep didn't made a mistake an...
Replying to myself...It seems the LNS used by our ISP is "forcing" the PPPoE connection to have a MRU of 1500 in both direction (ie it can be seen with debug ppp negotiation).Then the router got "confused", and thinks the PPPoE has a MTU of 1500 even...
Thanks for the answer.The problem is outbound so it is ok, I can control it.If I understood your answer, you're suggesting to add a CBWFQ in which I reserve a class for the ftp transfer and a class for the other protocols, is that right ?Then on whic...