Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
hii have configured load-balancing on CSM and also configured a virtual IP for all URLs (information, directory, services & authentication) on the CCM (UCM 7.1.3). The problem is that the services button do not work while all other URLs work when pub...
Hi GurusI have integrated UCM 7.1.3 with windows AD. I have configured the integration, syncronization and authentication. I have a problem with intermittent error on user options page. sometimes user can login properly but sometimes users get "authe...
Hi prosI have a UCM 7.1.3 cluster with a publisher and a subscriber. All external calls are routed to some 2 E1s connected to an MGCP controlled 3845 VGW. when i disconnect the publisher by shutting down the connected ports on the switch, i experienc...
Hi I have configured mobile connect and its working 95% ok. when a call comes to my phone from an allowed phone (using an ACL), the calls rings on my phone and my mobile showing the correct caller ID on my mobile i.e i use Prefix Digits (Outgoing Cal...
Himy setup is as followsIP phone ----UCM6.1.3---h323---2811 with E1 card -----Nortel61cMy configs are as attached.i can make calls from nortel to Cisco and the calling name displays. However i cannot make calls from cisco to nortel, the nortel phone ...
hi michaelOn the CSM i have allowed port 8080 since all CCM URLs seems to have that port. I mean the directory url, information & authentication urls works well, when i press the services button, the phone just shows requesting. some background info...
Hithanks for your concern. I checked all the services and they are running. Just some background info, when i checked the cluster summary under unified reporting console, i noticed that some components shows they are not installed, (check file attac...
Hidid you manage to solve your problem? i have the same issue. I have two UCM 7.1 and an MGCP gateway. when i take down the publisher, the gateway registers correctly on the gateway, however i can't make extenal calls but internal calls flows.regards...
