Which device had this config: interface Ethernet1/11switchport mode dot1q-tunnelswitchport access vlan 822spanning-tree port type edgespanning-tree bpdufilter enablespeed 1000no negotiate auto Was this the old device that the NCS5500 replaced, or the...

I have not looked at the latest yaml yet, but initial observations on the first version: ping from A1 to IPv4 VIP (10.11.0.254) did not work until I added "vlan 11" to each of D1 and D2ping from A1 to IPv6 VIP (auto-config'ed as FE80::5:73FF:FEA0:74 ...

Your observations are consistent with microbursts. If the remote peer will not shape, then increasing the burst size [B(c)] is a way to mitigate against ingress discards. Another option might be to use a 2- or 3-color policer to allow bursts up to a ...

In the context of RSVP-TE, LSP paths are indeed "tunnels", as it is even in the name of RFC 3209 "RSVP-TE: Extensions to RSVP for LSP Tunnels". The bold-face type in the RFC's abstract below is my own emphasis: Abstract This document describes the us...

You might try the internal CML/ViRL Team space set up to support Cisco employees, as obtaining the free Enterprise Smart License and connecting to the Smart License servers for employees follows a different process than external CML users.