About Cool47

Cool47 · 09-25-2023

Hello, I am looking to advertise same public /24 from two locations with BGP setup. SiteA connects to SiteB using MPLS by ISPX SiteA BGP adv Public IP say 192.168.1.0/24 to ISPASiteB BGP adv Public IP say 192.168.2.0/24 to ISPA Can we advertise the p...

Cool47 · 05-24-2023

Hello,I am looking to safely migrate the default route from edge router to secondary ISP2 with BGP setup. But couldn't be able to create bgp session.bgp config on 4455-01:router bgp 100bgp log-neighbor-changesrouter-id 192.168.1.50neighbor 192.168.1....

Cool47 · 09-27-2023

Thank you for the insight.

Cool47 · 09-27-2023

Thank you for the input. Yes, we have /24 ISP assigned IP subnet.

Cool47 · 09-27-2023

Thank you for the info. Yes I do see how it can be set it up now. The existing link 'SiteA connects to SiteB using MPLS by ISPX' which is not near to the edge device, So I can't make use of it for iBGP peering between SiteA and SiteB.

Cool47 · 09-26-2023

Thank you MHM for the response. Could you pls share more on how the config looks like?

Cool47 · 05-24-2023

Thank you all for the quick responses, I really appreciated.Yes, this is tested in lab(working as expected regular router but no ISR4455) and same configuration applied in the production. But it was disaster, the router crashed, rebooted and lost all...

Member Since	‎02-02-2023 07:42 AM
Date Last Visited	‎10-05-2023 05:37 AM
Posts	7
Total Helpful Votes Received	1

User Statistics

User Activity

Adv Same Public /24 from two location as active/standby using BGP.

Single homed bgp issue

Re: Adv Same Public /24 from two location as active/standby using BGP.

Re: Adv Same Public /24 from two location as active/standby using BGP.

Re: Adv Same Public /24 from two location as active/standby using BGP.

Re: Adv Same Public /24 from two location as active/standby using BGP.

Re: Single homed bgp issue