Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I have a Catalyst 3500XL ( WS-C3508G-XL) with 8 Giga interfaces and a Catalyst 3550 linked with a fiber, working ok.Now i have replaced the C3550 for a C2960. But I cant make the link up connecting the C2960 with the 3500XL.I had to change the fiber ...
Hello Guys,I have an ASA 5520 and wanna know, but couldn't find any information, if I can use the ASA with 2 ISP connections. One ISP will be my DMZ and VPN connections and the other one is for my normal internet traffic.I can also think in configuri...
Hello Guys,I have a WS-C3524-XL with 24 FastEthernet/IEEE 802.3 interface(s)2 Gigabit Ethernet/IEEE 802.3 interface(s)But when I try to insert a Gbic on it the interface don't recognizes it, it is like there nothing connected to it.I did a research a...
I have a CCm 4.1 and a 2841 acting as a gateway. Also have a FXO card and in one of this port I have a direct line. I have configured a connection plar on this port to dial the number 9030 (that is my hunt group) and configured a voip dial-peer point...
Branfarm1,1- There is no explicity trunk encapsulation command in this ios version. Only works with the dot1q by default2- I have made a compare with the commands sh int gig0/x switch portCan you check in order to see if there is someting wrong:From ...
The duplex setting is set as auto-duplex.There is something different now that I didin't saw last time. Now that there is no Gbic on it media type is missing and wasn't. I will test again and try to test with cross cable as well.I also have another ...
