Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
The core question is...what are you trying to achieve? Failover? If so...where is the failover occuring? On the WAN? On the LAN or Enterprise...or both? If you are multihoming today....you have WAN failover for each region, but not for both. Are you ...
By introducing the concept of multi-homing, it is necessary that you have your own public autonomous system number, that is provided that you are multi-homing with two different Internet service providers. If you are multi-homing with the same intern...
Check your port for port-security.You may be exceeding the maximum number of MAC addresses that are allowed to be associated with the port.http://www.cisco.com/en/US/docs/switches/lan/catalyst6500/ios/12.1E/native/configuration/guide/port_sec.htmlChe...
Yes.You can as long as the routes that you are advertising to your eBGP neighbor are publicly reachable.IP Space as defined in RFC 1918 & 4193 should not be advertised...as the ISP router should be dropping it anyways.The network command is needed. A...
