Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
All,I have a bunch of 1242AG access points that I'm pretty sure are expensive paperweights now, but before I toss them in the tech graveyard, I was hoping to get some second opinions or possible remedies on it.Basically, on all these units (5 or 6), ...
Does anyone know if there's a trick to this?According to the documentation, I'm supposed to be hitting the Esc key when I see the Loading "flash:/[imagename]" ####### ... line, but this doesn't seem to be working. I've tried hitting the Esc key a lo...
Hello, all.I am having an issue with a couple of the 1232 APs (out of 14) in one of our buildings, and I have no idea what could be causing the problem. The issue is that basically they don't seem to be receiving/transmitting at all, even though the...
1240 is the product "line," 1242 is the specific model. The come in both G and AG variants. The link below is a picture of an AG variant (with both an 2.4 Ghz "A" radio and a 5 Ghz "G" radio). The two antenna ports on the top in the blow image are ...
Well, they're PoE devices, so generally, take them down from the sky, attach them to a proper power injector and plug the Ethernet port straight into the main switch for whatever subnet they're on, and attach a console cable from my box to the AP so ...
One of them seems to have a hardware fault on the Ethernet port, but the other two look fine. Not bad for a couple minutes of holding down the mode button.
There isn't necesarrily any need to segment wireless LANs off like wired ones, and the approach we take at my workplace is wirless LAN segmented by function, so we do have a couple wirelss networks spanning several buildings, and no problems because ...
