Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello Cisco Support Forums,We have deployed a CME system with some 6941 phones, and we have ran up against a limitation of the phone. It seems that the 6941 (unlike the 7900 series) cannot create a second channel unless you use the conference or cal...
I have a tale of woe for you who may be considering Hybrid REAP with local switching.My client has a varied configuration, but the requirements basically screamed HREAP with local switching. They have 15 sites, had already purchased a single WLC 440...
Thanks - we'll be sure to know this for the next job.This time we'll just create a template so the NewCall button doesn't show up when a call is already in session.
Hi,The TAC helped me work through this.Apparently the WLAN number is very significant - you'll notice every WLAN created on the WLC has a number associated with the ssid when you create it. On newer versions of code, the number is visible in the web ...
Just an update as I work through this.Even though I was able to restore service by manually configuring the VLAN mappings on the second controller, when I pushed those APs back to the primary controller the mappings were again screwed up. I found th...
