Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
i need to know the router platform, min. memory, min flash and IOS needed to act as hub and as spokes for DMVPN with 1 hub and 100 spokes.. and i need to know the performance of DMVPN in this case.. will the performance differ with different dynamic ...
Dear All, We have an MPLS/VPN Network, all our PEs are cisco 7206 NPE-G2 Routers , all the PEs are making OSPF , MPLS with the P-Router and MP-BGP with a Router Reflector RouterAfter a while we found a problem in the Router that we couldn't te...
Hello,Can i have a quick briefing on any carrier-class centralized management/configuration system, that automates the configuration process for MPLS L3, L2VPNs, VPLS, IPTV, VoIP, gaming ... etcI read about the SCE but it doesn't seem to help on the ...
DearsI try to configure ATOM in two routers 7206VXR (NPE-G2) with IOS c7200p-advipservicesk9-mz.124-11.T1.bin as the following :-first router interface ATM2/0.100 point-to-point no snmp trap link-status pvc 0/1234 l2transportencapsulation aal5 xconn...
I try to configure ATOM in two 7206VXR (NPE-G2) routers as the following-first routerinterface ATM2/0.100 point-to-point no snmp trap link-status pvc 0/1234 l2transport xconnect 10.1.1.1 50 encapsulation mpls-second routerinterface ATM2/0.100 point-...
Dears, I could ping the Router with its loopback IP address while i can't telnet to it There is no problem in the routing or the source interface for the telnet sessionRegards
Dear sirIP CEF enabled in the two routersPE2#show ip cef 172.21.1.40172.21.1.40/32, version 11166, epoch 0, per-packet sharing0 packets, 0 bytes tag information set, shared local tag: 717 via 172.21.2.29, Serial1/1, 420 dependencies traffic s...
