About r.schwindt

r.schwindt · 10-01-2013

Hi !Anyone has an idea, how the web interface for the users (ucmuser) does sort the controlled em device profiles ?Or even better how to change the displayed sort order ?Changing the order of controlled device profiles in the user configuration in cc...

r.schwindt · 02-14-2007

Hello !We have a 2811 configured with ATM/IMA.Although evereything works fine in our config, when we do a "debug atm errors", we get lots of "ATM not active yet" errors in our log. This makes our logging useless, because more important messages get l...

r.schwindt · 12-06-2005

Hi Folks !We try to monitor traffic on a 2621 with the attached configuration.We do a "term mon" and a "debug ip packet detailed 199".After that we open an SSH-Connection from 10.85.0.15 to 192.168.55.15.The debug should show this, but there's no out...

r.schwindt · 02-20-2007

Thanks for Your reply,we know, we _could_ ignore these messages.The Problem is, that this message is loggedabout every 2 seconds for each interface.This makes it impossible to get a log of significant ATM errors over a longer period, e.g. one week wi...

r.schwindt · 12-06-2005

Rick,that hits the old spot.Very good approach, we'll do that witha syslog server.thx againRalph

r.schwindt · 12-06-2005

Rick,thanks a lot again for Your real fast reply !It's right, we need only monitor the traffic to the destination.What we want to find out is, who of our users generates lots of traffic to the destinations at daytimes, when users shouldn't do that, e...

r.schwindt · 12-06-2005

Hi Rick !Thanks a lot. This was exactly what we were looking for.Since this is only for short debugging purposes,we can re-enable ip route-cache after debuggingwithout rebooting the router, right ?Regards,Ralph

r.schwindt · 12-06-2005

Hi !Thanks first for Your answer.But what do You mean by "ideally" ?Or is there a different way to monitor trafficgoing THROUGH the router limited by a specific destination IP ?Regards,Ralph

Member Since	‎12-06-2005 03:49 AM
Date Last Visited	‎10-27-2017 11:46 AM
Posts	8

User Statistics

User Activity

CUCM 9.1.1 ucmuser web sort order of controlled device profiles

ATM not active yet error messages

debug ip packet detailed gives no output

Re: ATM not active yet error messages

Re: debug ip packet detailed gives no output

Re: debug ip packet detailed gives no output

Re: debug ip packet detailed gives no output

Re: debug ip packet detailed gives no output