About MrNo

MrNo · 03-16-2023

Hi, I want to enable jumbo frames bettwen nexus 9300 and cat3850.nexus is on NXOS: version 9.3(8)cat is on IOS XE Software, Version 16.09.05On nexus side I have set sh int po1interface port-channel1description MTU9kswitchport access vlan 555mtu 9216v...

MrNo · 03-22-2023

First, I am sorry.System mtu 9000/9216 is enabled on both switches.Only nexus have mtu set to 9216 on port.All hosts are in same vlan.jumbo works between hosts on nexus and also between hosts on 3850, but jumbo is still not working between switches.I...

MrNo · 03-16-2023

Hi is it really nessesary to enable system mtu to 9000? I am really not comfortable with that. I am not shure waht will happend. I have mtu 9216 enabled on portchannel and phy int. Also, there are two hosts on nexus and Jumbos are flying wheel bettwe...

MrNo · 03-16-2023

Hi, thanks for replay. cat3850 conf is:Global Ethernet MTU is 9000 bytes. Is this OK? Also: I am not shure about this onesh vlan mtuVLAN SVI_MTU MinMTU(port) MaxMTU(port) MTU_Mismatch---- ------------- ---------------- --------------- ------------55...

MrNo · 03-16-2023

when I try to ping from cat to nexus it works. But if I set size to anything above 1500 it fails. What am I missing?

Member Since	‎03-01-2023 10:57 AM
Date Last Visited	‎09-26-2023 10:04 PM
Posts	5
Total Helpful Votes Received	2

User Statistics

User Activity

Jumbo frames nexus 9300 to Cat3850

Re: Jumbo frames nexus 9300 to Cat3850

Re: Jumbo frames nexus 9300 to Cat3850

Re: Jumbo frames nexus 9300 to Cat3850

Re: Jumbo frames nexus 9300 to Cat3850