Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello all,
We have an issue with ios16 where guest access is not working due to failures at the redirection phase. This issue happens only with iPhone while it's working totally fine with Windows or Androids.
After some checking and troubleshooting ...
Hello,
Can someone explain to me the difference between those two features:Rate-Based attack prevention:https://www.cisco.com/c/en/us/td/docs/security/firepower/70/configuration/guide/fpmc-config-guide-v70/detecting_specific_threats.html#ID-2236-000...
Hi,
FMC 4500 recently upgraded to 7.0.5.
When I navigate to System>Updates I face some slowness in the webpage response. I believe (I could be wrong) this is due to the fact that we have multiple versions of VDB (~31 updates) on the FMC and I would l...
WLC is 8.10 (foreign/anchor setup) and ISE is 3.1.
Based on my observations, it could be that the configurations were not active for some reason. What I did was configuring the SSID from scratch, then reloaded the WLC and after that all worked fine ...
I have seen this issue as well, here I'm referring to the "Failed" state. In our case, it was due to the fact that the port channel interface facing the secondary FTD was administratively down, hence the interfaces were not active from switch side an...
DNS traffic is already allowed in the redirect ACL if that's what you are asking for. However, if endpoints want to reach ISE captive portal, they should query the internal DNS so that they can reach ISE. What we have seen with ios16 is that it ignor...
The device not reaching the web portal could be due to multiple reasons:1. Wrong DNS configuration. 2. Wrong redirect ACL/URL settings on ISE and the wireless controller. 3. Wrong authentication result from ISE. Check this guide for more details:http...
