Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello,I have a pair of very EOL WLC 4402s that I am trying to set up for my church. Unfortunately one of them is running a slightly older version of code and will not let me enable them to allow APs to connect. I need to enter the following commands ...
Just as an update Cisco was so not helpful in this instance. They would not provide a code file for me to download. I ended up finding another solution. Thanks,John
Were you ever able to get the code version downloaded from Cisco? If possible would you be able to share it with me? So far Cisco has not been at all helpful in my case. Thanks,John
Thanks @Mark Elsen I can confirm my WLC running the 7.0.252.0 does have the life-time check options available and am able to set it to allow APs to connect to it. I need a copy of this code to install on the second controller so it will also allow A...
Hi All,We are seeing a similar problem but with a 3650 router and an Allied Telesyn 8724XL switch. It seems the 3650 is not able to arp into the Vlan space to find devices connected to it behind the switch. If one of these devices pings out for their...