About RichySlo

RichySlo · 04-12-2023

Hi there,i need help to configure a new 500mb connection with IPOE .Situation:KPN ISP with lighting edge 310. The KPN doc says they need two interfaces: GigabitEthernet0/0/0 for the WAN (KPN side) and GigabitEthernet0/0/1 for the customer side.Cable ...

RichySlo · 03-07-2023

Hii everyone,I am currently running into an issue when I try to upload a new .bin image to one of our C9300-48P switches.When I try to upload the image using "copy tftp: flash: " I get the error that says "permission denied"When I check the directory...

RichySlo · 04-13-2023

Well, I tried migrating with a slightly modified config, as soon as i plug in the cable from the LightningEdge 310 to the Cisco C1111-8p i get the following errors.*Apr 13 14:24:15.958: RG Infra Trace: Failure to get trace slot*Apr 13 14:24:15.958: R...

RichySlo · 04-13-2023

So i dont have to configura anything on the C1111 if i understand it correctly?

RichySlo · 04-13-2023

There is a ip routing statement "ip route 0.0.0.0 0.0.0.0 145.xx.xx.37".I will add the access-list to the right interface, thanks for noticing!The bootloop has been resolved, i dont know what the cause was but I dont see any errors anymore.

RichySlo · 04-13-2023

Hi,Well i basically copied the config from our old Cisco-1921/K9 and changed the things needed for IPoE.We dont want to use NAT and are routing all the traffic to the /30(gi0/0/0). The/29(0/0/1) is not a LAN port but also a routed WAN port, is this c...

RichySlo · 04-12-2023

Hi @wvanderhorst , did you get it to work, I am running into a similar issue with KPN IPOE.kind regards,Rischayro Slominska

Member Since	‎03-07-2023 04:14 AM
Date Last Visited	‎05-09-2023 02:44 AM
Posts	18
Total Helpful Votes Received	1

User Statistics

User Activity

IPOE KPN Connection C1111-8P

C9300 missing Flash: and not able to write config

Re: IPOE KPN Connection C1111-8P

Re: IPOE KPN Connection C1111-8P

Re: IPOE KPN Connection C1111-8P

Re: IPOE KPN Connection C1111-8P

Re: IPOE KPN connection cisco 4331 with two local vlan does not route