Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
My current setup is 2 units L3 switches running HSRP. The port 1 of WLC is connected to one of the L3-A switch. Is it possible for me to connect port 2 of my WLC to L3-B switch(same SSID)so that in case of L3-A switch down, my WLC and wireless AP sti...
Customer have 2 4503 running PVST. Have trunk link to new/old Cisco access switch using dot1q and isl encap.Customer introduce a third party IPS devices which support PVST+ only. Can i change my Cisco 4503 PVST to PVST+? i have isl and dot1q encap on...
Using IPS 5.0.I'm creating custom signature on SMTP using State Name: SMTP Commands. My question:1. On the Regex String, what should i key in to disable any users from the sex.com domain to send me email. I have keyin[Mm][Aa][Ii][Li][\t][Ff][Rr][Oo][...
How to configure the Internet Router and ASA 5510 for VPN client access if the Router has only one public interface???1 . tunnel from VPN client to Internet Router ?? or (throw away my ASA5510 ??)2. tunnel from VPN client straight to ASA5510 or3. tun...
If you have a single firewall and single Router (for both ISP), should be easy.....but you might need to modify existing IP address of the firewall.Quick example with 1 router 1 firewall by using firewall 1 external interface only(Double NAT, at fire...
I have done few ...Depends on senario....1. If the service provider give more than one public IP...thenFirewall Inside - private ip Firewall outside - public ipDSL - public ip2. If 1 public ip only.Firewall Inside - private IPFirewall outside - priva...
My understanding is,As long as you don't have one to one NAT, you will need NAT traversal.My situation is simple, i have one third party broadband router and two pc and home. If my office firewall doesn't enable NAT-T, i will not able to pass traffic...
Not very sure it will work or not...Don't do translation, 192.168.112.0/24 go into dmz as 192.168.112.0/24.do static (outside,dmz) 192.168.112.0 192.168.112.0 netmask 255.255.255.0you might need access list....Please let me know....
I have tried something before....tunnel everything...but in your case, maybe you can try something like this.if your vpnpool is 192.168.88.1-192.168.88.254Do a extended access-list for 192.168.88.0/24 to SSHThen donat (outside) 6 access-list abcgloba...
