About smorinval

smorinval · 05-05-2025

Hello,The master aironet 1832 from our network crashed between wednesday and friday.I did a backup of its config, so I have a config.txt file up to date.As we need to have the master for some production usages (I don't know why, a laptop or a smartph...

smorinval · 05-03-2024

Hello,We had a power loss on our site - equipped with 6 * Aironet 1830 Mobility express Series.The "master" Aironet lost power, so we had to reboot the whole 6 APs.The method is as follows :- first shut down the 5 "slave" APs- verify that the "master...

smorinval · 03-09-2023

Hi,We just bought a new AP (so an Air-AP-1832i) to add on our network (composed by 5 Air-Ap-1832i).At this point, the new AP is on the 8.5.140 FW, and the current network is in 8.6.101.1 FW.For production reasons, we wish to stay on the 8.6.101.0 on ...

smorinval · 05-12-2025

It's solved, the key was to check that the new AP was running in mobility-express mode AND unplug the other APs.This allowed the new AP to broadcast the AirProvision SSID and then run the initial configuration wizard.After this wizard, I was able to ...

smorinval · 05-11-2025

Hello @Mark Elsen , I was off friday, I'll try again today.From what I understood in the docs, I'll have to shut down all the existing APs to allow the new one to broadcast its SSID.I planned to check this ASAP, I'll let you know if it works better.

smorinval · 05-07-2025

When following the guide, I should see a new SSID CiscoAirProvision, but I can't see it :Fields and Their Values in the Output What to do Next AP Image Type: MOBILITY EXPRESS IMAGE AP Configuration: MOBILITY EXPRESS CAPABLE No conversion is requi...

smorinval · 05-07-2025

@Mark Elsen I posted it twice, it was deleted twice.I guess there is a problem with posting the boot process, even if I hide the IP and MAC addresses.While looking in the help of the terminal, I can see there are capwap commands :AP5CE1.7680.3DE0# Ex...

smorinval · 05-07-2025

Here is the boot process (sorry for late answer, I was pretty sure I clicked on Reply button).I'm changing the MAC and IP addresses to keep some security inside.cli: AP Rebooting: CLI triggered reboot(reload command) Writing reload timestamp (Thu ...

Member Since	‎03-09-2023 04:10 AM
Date Last Visited	‎05-12-2025 11:12 PM
Posts	22
Total Helpful Votes Received	3

User Statistics

User Activity

Import a config.txt to another Aironet 1832

Aironet 1830 series lost its IP address after power loss

Air-AP-1832i-e-K9 8.6 firmware to get on an existing controller

Re: Import a config.txt to another Aironet 1832

Re: Import a config.txt to another Aironet 1832

Re: Import a config.txt to another Aironet 1832

Re: Import a config.txt to another Aironet 1832

Re: Import a config.txt to another Aironet 1832