I have some Catalyst 4948-10GE switches configured for QoS with COS to DSCP mapping commands. On each interface "qos cos 1" and "qos trust cos" are configured. A WireShark monitor of any port reveals that the packet DSCP value is "0x00". Have tried t...

Is it possible to bind a DHCP address to a particular MAC address on the ASA5505 firewall? The GUI will only let you assign a dynamic pool. Are there CLI commands similiar to an 800 router for this to work?

Using Tftpd32 TFTP server.Unable to load any software to any ASA firewall on the networkAccessing tftp://10.15.4.55/asdm-603.bin...WARNING: TFTP download incomplete!%Error reading tftp://10.15.4.55/asdm-603.bin (Unspecified Error)Tftpd32 works for al...

6509 is running IOS ver 72033.advipservcesk9_wan_mz.122-33.SXH2a3750 stack consists of one 3750g-24ts and one 3750-24p running ipbasek9-122.46(SE).When each end configured for "channel-group n mode on" the 3750 ports go into err-disable. With each en...

I have a requirement to NAT the destination address and destination protocol port on the ASA5550. The ASA appears to only NAT inside address to the outside. Is there a way to NAT/PAT the destination address??