02-25-2009 07:55 PM - edited 03-11-2019 07:57 AM
Is it possible to bind a DHCP address to a particular MAC address on the ASA5505 firewall? The GUI will only let you assign a dynamic pool. Are there CLI commands similiar to an 800 router for this to work?
Solved! Go to Solution.
02-25-2009 08:55 PM
Can not do that on ASA.
02-25-2009 08:55 PM
Can not do that on ASA.
02-26-2009 10:19 AM
Hey,
We have similar situation, But in our case its a pix running on 6.3
So does that mean this is not supported on any Cisco firewall ?
Thx,
Amol
02-26-2009 10:39 AM
I did not see any commands can do that. So the answer is NO.
04-18-2016 11:13 PM
Hi Yudong,
I got this same question but now a days in different scenario. i am using cisco 5512 v9.0 could it be possble with this one ??
Any help would be appreciable.
02-26-2009 06:26 PM
That sums it up nicely.
Thank you.
RobJ
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide