Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi All,
I have 3 sites A, B, C. All three are broadcast networks. Server in Site A sends broadcast traffic and R1 router in site A will convert this broadcast to multicast using "ip multicast helper-map". My destinations are in B and C sites. Does IP...
Hi Team, I have configured an end host(10.10.10.1) to receive multicast traffic for a stream 229.1.1.1. I see 10.10.10.1 as part of "sh ip igmp membership command" and as outgoing interface for "sh ip mroute 229.1.1.1" command. However after 3 mins, ...
Hi All, I have a multicast source at one end connected to 3750. Receivers(which can’t send multicast joins) are connected to 3750. These end points are connected like, Multicast source ------ Cisco 3750 ----- Cisco 7600 -------- Cisco 7600 ----- Cis...
Yeah Jon. But any idea why host is coming out of group membership after 3 minutes and joining again after 3 minutes and again leaving the group forever. AFAIK, Either it should maintain group membership forever if its interested in traffic else it w...
Hi Jon, Sorry for the confusion. What you have said is correct. I am seeing interface that is connected to the IP Subnet 10.10.10.1 as outgoing interface. And Yes, End hostis sending IGMP requests to the router. End host is not IGMPv3 supported. So I...
