About sabibby

sabibby · 02-03-2022

IntroductionConfigure AWSConfigure IOS-XEVerify Introduction This document describes how to configure an IOS-XE (ASR1K used in the example) IPsec Site-to-Site VPN (Virtual Private Network) connection to AWS (Amazon Web Services) native VPN. Writ...

sabibby · 04-29-2020

.

sabibby · 06-02-2017

IOS Software-15.1.4M12a c1841-adventerprisek9-mz.151-4.M12a.bin will do the job for IP+ & Security (K9) -Sam

sabibby · 08-11-2016

Lots of variables, but when you instruct OSPF to generate the default route it floods this information via the LSA database throughout the area. So blocking the default route from begin advertised would not work peruse, you either flood it everywhere...

sabibby · 08-11-2016

Hey Mike, Agg-A is learning the route from both Core-C & Agg-B, one is via iBGP the other is via eBGP. When Agg-A compares the two iBGP is winning due tio having a better weight: (check your BGP configs for a policy that sets weight from routes comi...

sabibby · 11-06-2015

Hey Sudhakar, With the multicast helper map you will be converting the ingress broadcast packet to a multicast packet. Therefore you should be able to send this to multiple sites, If you have both site B & C join the multicast group that you convert ...

Member Since	‎10-06-2015 08:36 AM
Date Last Visited	‎03-27-2024 12:16 AM
Posts	6
Total Helpful Votes Received	30

User Statistics

User Activity

Configure IOS-XE Site-to-Site VPN Connection to Amazon Web Services

MPLS L2VPN BGP signalling no LDP, NHRP over flexvpn

IOS Software-15.1.4M12a

Lots of variables, but when

Hey Mike,

Hey Sudhakar,