Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello,I try to flash a new image on a Cisco 1841 via TFTP:#copy tftp: flash: Address or name of remote host []? 192.168.4.2Source filename []? c1841-spservicesk9-mz.124-11.XJ.binDestination filename [c1841-spservicesk9-mz.124-11.XJ.bin]? Accessing tf...
Hello,I configured a Cisco 1841 fpr PPPoE via Multilink PPP. I try to set the command"pppoe enable group global"for the FastEthernet0/0 and FastEthernet0/1 interfaces. But this command is not accepted, only "pppoe enable" is possible. Is there a big ...
Hello,I have to setup two port redirections on our PIX. I need this two redirections:Outside-IP 212.6.1.1 to SSN 10.10.10.2for port 443 (HTTPS).Outside-IP 212.6.1.1 to SSN 10.10.10.253 for port 23 (Telnet).The access should be possible from any sourc...
Hello,thank you! But the command 'squeeze flash:' is not known an even the remove of the file is not possible:#del c1841-ipbase-mz.124-1c.binDelete filename [c1841-ipbase-mz.124-1c.bin]? yDelete flash:y? [confirm]y%Error deleting flash:y (File not fo...
