Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I am not sure if NAT is the solution, but here is my problem:For a test lab I have the following setup: (The IP's are in 192.168.49.x range and subnetted as /29)Landing server(192.168.49.26)---(192.168.49.25/29)-[[Cisco6500]]-(49.1/29)---(49.2)Cisco ...
We are trying to get the details from WAAS CM device using API's as defined by Cisco. The document can be referred to from the below link:http://www.cisco.com/en/US/docs/app_ntwk_services/waas/waas/v411/api/reference/guide/intr_api.pdfCisco API doc a...
One of my clients has a communication issue for an application installed on a server. He did an extended ping to the server to get the following response:Core_6506#ping Protocol [ip]: Target IP address: 17.18.27.27 Repeat count [5]: 10 Extended comma...
NetFlow configuration on the router should not be dependent on the collector. At the most, you might have to change the port on which flows are exported to match the one that your NetFlow collector is listening to. Other than that, most common Flexib...
This might be of more help:http://www.cisco.com/en/US/technologies/tk648/tk362/technologies_white_paper09186a00800a3db9.html R,Don Jacob *** Pls rate all useful responses ***
I guess they are hexadecimal. Cisco would send out info as below for the scope field:0x0001 System0x0002 Interface0x0003 Line Card0x0004 NetFlow Cache0x0005 Template R,Don Jacob *** Pls rate all useful responses ***
This means no packet or flow sampling is taking place and all traffic is created for NetFlow.On Cisco 7600 series routers, there are two types of NetFlow sampling - NetFlow traffic sampling and NetFlow flow sampling. NetFlow traffic sampling is suppo...
