Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
9800L wireless controller with APs in local mode. I tried swapping controllers with the exact same configurations and policies, but the waps would not join the new controllers.I had this labbed up and couldnt get it to work. So i factory reset the ...
Hello,We are starting to ramp up a large deployment of 9166 APs with the 9800 WLC. While in the lab, we came up with the attached document for provisioning an AP for flex connect. It is very time consuming obviously. Is there another process for d...
I have a 4351 connected to the Internet using a WLC 9800L. the 4351 is connected to a switch which is connected to the Waps, which are 9166s. When i connect a laptop wirelessly to the WAP and login, it does pull an IPV6 address, but will not browse ...
Brand new WLC-9800L with 17.9.3. Trying to get the trial license activated using the Gui. Selected both and clicked the save and reload box. Once reloaded, did a show license and it still shows no license. Any ideas?
I have a pretty complex IPV6 network setup with the 9800 and using 9136 APs. All seems to be working well except for android phones. They authenticate but are unable to pull an IPV6 address. This happens for Pixel phones, Galazy phones, basically ...
So my next task is, we are using the custom web authorization banner. Is there a way to have different logins and passwords for each SSID? Right now we are adding accounts in the global policy. We noticed we can go to any SSID and login with any o...
Yes, we factory reset 2 controllers today, configured identical, swapped them out and the APs joined the new controller. Gonna go through the configs line by line, my guess there was something lingering causing them not to join in that old setup. T...
We reset from the APs with the old controller, shutdown the POE port on the switch attached to the AP to prevent rebooting and joining the original controller. Once the APS were reset, swapped controller, enabled POE and let them boot and join the n...
