Hi All,
I am trying to set up a site-to-site VPN between an RV130 at a remote location and an ASA5505 in our main office.
Unfortunately the link won't go up. On the ASA side I see "IP = 79.33.131.15, Error processing payload: Payload ID: 1". This I...
Hi all,
I am fairly new to ASA configuration but am having a weird problem.
I have 2 interfaces, "Security" (inside), and Outside.
Security is 192.168.200.1/24
Outside is 192.168.210.1/24
I have a host on each interface (PC connected directly t...
Hello everyone!
I am having an issue and am out of ideas, hoping someone can help.
We have a small flat network made up of SG 200 switches as follows:
Switch A with a trunk link to Switch B
Switch B with a trunk link to Switch C
Switch C with trun...
Here are the logs now that the SHA/MD5 issue has been solved:
Clears phase 1, then get an error that there's something wrong with the message. I've confirmed the shared keys are correct once again. Just to be thorough I tried with a bad key and I got...
YEP! Everything looked ok in the config but the wizard on one end put AES as policy so MD5 was being ignored.
I'm now getting a PAYLOAD_MALFORMED message though, followed by Information Exchange processing failed.
getting some more logs now
Actually I thought I was in debugging level but was only informational. On debug level I also have this in the logs:
IP = 79.33.131.15, sending delete/delete with reason message
IP = 79.33.131.15,IKE SA MM:cd4d434e terminating: flags 0x010000002, r...
It turns out it was a PC (Mac) issue, but a strange one at that. For some reason changing the subnet mask from 255.255.254.0 to 255.255.255.0 on one of the hosts made it reply, even though the pings were coming from a subnet well outside the netmask ...