Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
In my Head office I am using vlans 2,3,4 and have assigned dhcp scopes for each vlanin my branch office I have vlans 5,6,7 without dhcp scopesi want users that are connected to vlan 5 In branch office to get ip address from vlan 2 in head officei can...
We have an environment of both 1832i and 9105 AXI APs with the 9105 ap being the ewc. After being connected for a while, clients observe the globe icon instead of the wifi one and don’t have internet connection anymore, they have to switch to other s...
My 1832i ap doesn't establish a connection with the wireless controller, it is staying in discovery mode and keeps on rebooting. I haven't changed the configuration nor upgraded anything.CAPWAP State: Discovery[*12/27/2022 08:38:56.9909] Got WLC set...
I am trying this command: archive download-sw /reload tftp://x.x.x.x/ap1g8-k9w8-tar.153-3.JK5.tar on my AP9105 AXI model but I am receiving the following error: This image does not support this AP product or model. Please use the recommended image an...
I have bought 9105 axi access points in the hope of converting them to EWC, but the serial number does not mentione the EWC option ( others 9105 axi ap I bought had that EWC mentioned on them). So even if it isn't mentioned, will they be EWC capable?
What I am planning to do is for branch users to connect via access points with its ssids’ assigned vlans in the branch office, I wanted to check if a user was connected to an ssid with vlan 2 (not present in the branch but present in the Head office)...
Clients are all windows 10 users with intel chips, mobile users don't have that issue.DNS is not the cause since users that are connected through ethernet don't face the issue. All devices are of Lenovo Thinkpad L15 and E15 models. The current runnin...
