Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Can anyone explain why all of the documentation regarding this command refers to a kbps threshold that can be increased when there are only ever two options. Unless I am missing something entirely.ip pim spt-threshold {kbps | infinity } [group-list a...
The solution that worked for me was the error disable recovery function. I put the following commands on the switches having the issue:errdisable detect cause inline-power <-- This was on by default but if it wasn't then this turned it on.errdis...
We were having this issue on some 3850's with 16.12.3a and 16.12.8. After trying a few things recommended here nothing worked. Although none of the ports were in an errdisable state, I ended up turning on errdisable detect cause inline-power, errdisa...
SSH Version 1.99 is Version 2 with backwards compatibility turned on. From what I have seen in order to avoid SSH Ver 1.99 you have to set the SSH Version to 2 before you generate the RSA Key. Otherwise when the key is created there is a flag of som...
I have run into this issue several times on Catalyst switches and various routers. From what I have seen you have to set the SSH Version to 2 before you generate the RSA Key. Otherwise when the key is created there is a flag of some sort that ident...
This problem appeared after I implemented config archiving on Friday on about 20 switches. 5 of those were stacked switches (sets of 2-4), of those 5, 4 stacks were IOS 16.12.4 (2 of which had this issue, one stack of 2x 9300's and one of 2x 3850's)...
