About kwuenP

kwuenP · 08-18-2023

I have had the performance issue with Cisco ASR 1001-X. We received a lot of log messages like "%IOSXE_QFP-2-LOAD_EXCEED: Slot: 0, QFP:0, Load 99% exceeds the setting threshold." few time per day but not all days. Router throughput is 20 Gbps with 2x...

kwuenP · 07-25-2023

We're using ASR1001-X with universalk9.16.09.05 version. When I was trying to find the next hop with a pair of src-dst-ip and port to evaluate the load sharing algorithm with the command "show ip cef exact-route src-ip dst-ip dest-port 443 " and got...

kwuenP · 07-09-2024

yes. we've tried. We did both separate the NATed and non-NATed traffic from the same interface and Increase the size of the cache on the NAT Gatekeeper feature as Cisco recommend. It did not work. We think the main reason is our heavy NAT workload.

kwuenP · 10-30-2023

Be sure that HTTP Server feature was disabled at the first time configuration. So if it is about router performance, it is quite disappointing that ASR1001-X with truly 20Gbps throughput and 16GB RAM can not do some basic NAT.Total number of transla...

kwuenP · 10-30-2023

Hi Leo,Sorry for a long delay. I've done update cert following this topic https://www.cisco.com/c/en/us/support/docs/field-notices/723/fn72323.html and waited to reboot the devices. However, it appears not to be our caseWe also migrated BGP workload ...

kwuenP · 08-21-2023

@Leo Laohoo wrote:Post the complete output to the following commands: sh platform resourcesh platform software status con briefsh crypto pki trustpool | include cn=Thank for your reply.sh platform resource#sh platform resource Load for five secs: 2%...

kwuenP · 06-28-2023

we have the same issue with cisco Nexus9000 C9364C Chassis SoftwareBIOS: version 05.44NXOS: version 9.3(8)BIOS compile time: 04/02/2021NXOS image file is: bootflash:///nxos.9.3.8.binNXOS compile time: 8/4/2021 13:00:00 [08/05/2021 05:25:26]at the tim...

Member Since	‎06-27-2023 10:11 AM
Date Last Visited	‎08-19-2024 04:38 AM
Posts	7

User Statistics

User Activity

%IOSXE_QFP-2-LOAD_EXCEED: Slot: 0, QFP:0, Load 99% exceeds. ASR1k

"show ip cef vrf dmz-vrf exact-route" do not show the right next hop

Re: %IOSXE_QFP-2-LOAD_EXCEED: Slot: 0, QFP:0, Load 99% exceeds. ASR1k

Re: %IOSXE_QFP-2-LOAD_EXCEED: Slot: 0, QFP:0, Load 99% exceeds. ASR1k

Re: %IOSXE_QFP-2-LOAD_EXCEED: Slot: 0, QFP:0, Load 99% exceeds. ASR1k

Re: %IOSXE_QFP-2-LOAD_EXCEED: Slot: 0, QFP:0, Load 99% exceeds. ASR1k

Re: strange BUFFER_THRESHOLD_EXCEEDED log on N9K