About am_rajan

am_rajan · 01-24-2024

HiI am new to this topics and will be great if any one can help.FTD 1120 in HA.Server1.xxx.ws --> public IP 55.55.55.55 ---NAT----> 172.x.x.100:8080Server2.xxx.ws --> public IP 55.55.55.55 ---NAT----> 172.x.x.150:3636As you can see my task is to acce...

am_rajan · 08-09-2023

Hello,Looking for some help with this topic since I am new to this one.We have 2 FP1120 in HA. The inside interface is 1/8 with 2 sub interfaces. 1/8.100 & 1/8.101The 1/8.100 has a network of 172.16.x.x/24.The Outside Interface is assigned an public ...

am_rajan · 06-27-2023

I am a rookie, and I was hoping to get some support here. Let me explain the situation. I have 2 FP 1120 in an Active-Standby HA configuration.I am using one failover link as a combined failover/state link which is interface 1/6I am not using the man...

am_rajan · 01-27-2024

Hello Yes, I would like to know how to configure the NAT and ACCESS rule, and I am using FDM. And please keep in mind that the traffic initiates from outside to inside, and it will be HTTPS traffic. The client access the service through the dns which...

am_rajan · 08-10-2023

Hello Marce,First of all, thank you for taking the time to help me with this topic, I really appreciate it.I have tried to do what you have mentioned but there are a few things which are missed. I have attached few pics which will help you and me to ...

am_rajan · 08-09-2023

Hello Aref,Just to let you know that I removed the LACP and everything is working fine as normal. Thank you for helping me with the issue, and clarifying the incompatibility of LACP and HA.It took sometime for me to check on these, hence the delay in...

am_rajan · 08-09-2023

Hello MHM,Just to let you know that I removed the LACP and everything is working fine as normal. Thank you for helping me with the issue, and clarifying the incompatibility of LACP and HA.It took sometime for me to check on these, hence the delay in ...

am_rajan · 06-28-2023

Oh you are asking to put the standby ip ... okay Maybe I will elaborate on this once more. Say i have FTD1 with 192.168.2.1 and FTD2 with 192.168.2.2 and on the outside I have public ip .70 assigned to FTD1 and .71 assigned to FTD2. So now, are you t...

Member Since	‎06-27-2023 01:00 PM
Date Last Visited	‎01-31-2024 12:13 AM
Posts	13
Total Helpful Votes Received	2

User Statistics

User Activity

NAT Configuration

Help with NAT & ACL FP1120

Firepower 1120 HA + FDM + status/protocol shows down/down

Re: NAT Configuration

Re: Help with NAT & ACL FP1120

Re: Firepower 1120 HA + FDM + status/protocol shows down/down

Re: Firepower 1120 HA + FDM + status/protocol shows down/down

Re: Firepower 1120 HA + FDM + status/protocol shows down/down