Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi! I've been following CLI Book 2: Cisco Secure Firewall ASA Series Firewall CLI Configuration Guide, 9.18 specifically around Static NAT with Port Translation for Non-Standard Ports. I'm attempting to listen on *:4433 and rewrite it inside to a ser...
It's been found that there was formerly a strong recommendation for the Nexus 7K-series switches (on page 27, 40), where under the following conditions:- Point-to-point routed links, terminating on a vPC domain- "Backup path routing" needed using l3 ...
Hi there. Using RSP440 / Typhoon LCs / all -TR SKUs (even at the edge where design would call for -SE) we're observing ~20ms latency added for the case where the router is treating traffic entering on a VRF.MPLS-LDP and MP-BGP provides next-hop traff...
Here's the detailed logs ... This all still looks right to me.Input SessionOutput Session# packet-tracer input outside tcp 86.75.30.9 64151 55.5.12.34 4433 detailedPhase: 1Type: CAPTURESubtype:Result: ALLOWElapsed time: 18176 nsConfig:Additional Info...
Alright, I was able to confirm that the TCP ping towards both servers succeeds, I think this is after adding a line to the firewall to permit inside traffic appearing at the outside interface:# ping tcp inside 192.168.1.3 443 timeout 0 repeat 1400Typ...
