Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello,I need to replace a SSD on FPR3105 and then install a FTD version 7.4.2 to the device. I saw a document from Cisco below which says use a SPA file for the initial boot from rommon. However I cannot find the SPA file from CIsco download center, ...
Hello guys,I have 2 FPR3105 which are running in HA. however standby one had a issue on its SSD, so I need to replace it by RMA. It has only one SSD, in this situation, Do I need to reimage FTD to the standby one? The FPR3105s are running on FMC.
Hi Guys,We recently replaced our APs to C9120 model, and they are joined to C9800 WLC. However some old clients who have WiFi 3 WLAN card are having issue, they lost wireless connection for a second and re-connected automatically. This issue happends...
Hi guys!I'm back carrying weird issue with my WLC and AP! Today morning, I saw some weird logs on my core switch.A lot of MAC address flapping log written there especially between AP and WLC. All my AP is joined WLC, most AP are 3700, 3800 or 9120. W...
Hi All, I have issue on my voice gateway, below logs are being written since yesterday. and E1 controller has orange light on its 0/0/1. What's the problem on it? Please help!!000541: Mar 27 15:52:54.988: %CONTROLLER-5-UPDOWN: Controller E1 0/0/1, ch...
So.. isolating the co-channel interferer means setting different channel on each APs? If there's something I can do on WLC side, Please let me know. I'll try to test!
It's like automated guided vehicle used in a factory area. Not sure how it's designed for WLAN but the engineer was like that. I also want to change that old WLAN card....
Thanks for answer Leo.But unfortunately an engineer from client device side says he cannot replace the WLAN card which is very old model. Do you think adjusting 2.4GHz channel on APs would help?
